top of page

COWLS & BIRDGUARDS

Chimney Bird Guard

The main reason you may require a cowl or bird guard fitting is to keep the birds from nesting or falling down and getting stuck in the flue. This will block up your flue, which can either cause a chimney fire or force dangerous carbon monoxide gasses to enter your house.

 

You may also require one to reduce downdraft on an exposed or short chimney stack.

 

Or you might need one to cap off a disused flue. This option would stop any pests or rain from entering the flue, yet still keep it ventilated.

 

Below are the options I supply and fit.

 

The only stipulations I do ask, to be eligible for these low prices, is that you have an existing standard sized, round chimney pot in place, for these cowls to be fitted to. Also, I will need reasonable front or rear access to the chimney stack with easy reach pots only (within arms reach). And no houses over the normal 2 storeys. This is because I work alone and like keep to safe practices. Be sure to check your stacks before booking.

​

All prices below include VAT, supply and fitting.​

​

Cowl Chimney Sweep.jpeg

BREWER BIRDGUARD - SOLID FUEL

Designed to prevent once and for all the ingress of birds, small mammals and leaves into used or unused chimney flues.

 

This is the slightly cheaper version of the UFO Cowl below, but without the downdraft properties.

It does however still limit rainfall with its cap. To fit standard pots of 125-250mm
 

Price £120 - Supplied & Fitted

(discount for more than one fitted, to same stack)

UFO ANTI-DOWNDRAFT

Designed to prevent once and for all the ingress of birds, and assist in the reduction of downdraft in chimney flues. This does NOT cure downdraught 100%.

To fit standard pots of 125-250mm

​
 

Price £150 - Supplied & Fitted

Anti Downdraft Chimney Sweep.jpeg

CHIMNEY CAPPER

The Chimney Capper is for use on a disused flue only and is a simple value for money chimney cap, which prevents rain and bird entry into your chimney.

 

Instant, simple fitting complete with ventilation, to fit standard pots of 125-250mm.

​
 

Price £80 - Supplied & Fitted

(discount for more than one fitted, to same stack)

Capper Chimney Sweep.jpeg
birdguard_gas_round.jpg

BREWER BIRDGUARD - GAS ONLY

Designed to prevent once and for all the ingress of birds, small mammals and leaves into used or unused chimney flues.

 

This is the slightly cheaper version of the UFO Cowl below, but without the downdraft properties.

It does however still limit rainfall with its cap. To fit standard pots of 125-250mm
 

Price £120 - Supplied & Fitted

(discount for more than one fitted, to same stack)

BESPOKE DESIGN

Due to a wide variation in chimney pots or flue exits, I am also able to supply & fit a wide variety of solutions to meet your specific requirements.

​

This may require either a site visit or for you to send me some pictures across, to determine what best meets your needs.

​

As I am limited on storage space, I am only able to keep a small quantity of the cowls previously advertised.

 

Therefore, all bespoke cowls will have to be individually ordered in specially and may take a little while to get them.
 

Prices POA 

large_rectangular.jpg
Chimney Bird Guard
Chimney Bird Guard
Chimney Bird Guard
Chimney Bird Guard
Chimney Cowl Swindon.jpg
bottom of page